
Installation Using Surface Mount Bracket Installation Using Flush Mount Ring Bracket (Option)
2
10 11
Drilling the Hole on the Ceiling
1
Fix the Main Body
5
Connect the
Terminal Blocks
4
Connect the Cables
3
Detach the
Protection Vinyl
6
Drilling the Hole on the Ceiling
To pass cables through the ceiling, drill a hole
(30mm diameter) on the ceiling panel.
Pass the cables to the ¾” pipe hole, and screw
the surface mount bracket to the ceiling.
Connect the Terminal Blocks
4
Connect the terminal blocks to the main body.
Fix the Main Body
5
Screw the main body to the surface mount bracket
by screwing 4 lock-up screws.
Detach the Protection Vinyl
6
Detach the protection vinyl from the dome cover.
Detach the Protection Vinyl
6
Detach the protection vinyl from the dome cover.
Connect the Cables
3
- Connect wire cables to the terminal blocks.
- Refer page 14, 15 for details.
Fix the Surface
Mount Bracket
2
1
Fix the Surface Mount Bracket
2
Fix the Main Body
5
Fix the Flush Mount
Ring Bracket to the
Main Body
3
Drilling the Hole on the Ceiling
1
To pass cables through the ceiling, drill a
hole(70mm diameter) on the ceiling.
Separate the Lock-up Screws from the
Main Body
2
Separate the 4 lock-up screws from the main body
in advance.
Fix the Flush Mount Ring Bracket to the
Main Body
3
Fix the flush mount ring bracket to the main body
using torx screws.
Fix the Main Body
5
Screw the main body with the surface mount
bracket to the ceiling using the screws on the
surface mount bracket.
Connect Wire the Cables and Terminal Blocks
4
Connect wire cables to the terminal blocks.
Refer page 14, 15 for details.
Separate the Lock-up
Screws from the Main
Body
2
Wire the Cables and
Terminal Blocks
4
Drilling the Hole
on the Ceiling
1
Kommentare zu diesen Handbüchern