Videcon VHD-CAT5-CONV Bedienungsanleitung

VHDIPLNetwork Video recorderPLUG & PLAYUSER MANUALUSER MANUALUSER MANUALUSER MANUAL

5 3 VHDIPL Networking solutions The VHDIPL has 5 Ethernet ports, one is RJ45 without POE, others are POE supported ports. The 4 POE ports are for conn

6 4 Installation 4.1 Days recorded Table 4-1 video storage time HDD capacity Video stream Cameras Days recorded 2 x 3TB 720p at 6 Mbps 4 30 2 x 3TB 10

7 4.2 Front panel description Figure 4-1 shows the front panel of the VHDIPL. Table 4-1 shows the description of the front panel. Figure 4-1 Front pan

8 4.3 Rear panel description Figure 4-2 shows the rear panel of the VHDIPL. Table 4-2 shows the interface of rear panel. Figure 4-2 Rear panel Ta

9 No. Name Description 9 Ground connect Ground connect 10 DC48V Power interface DC48V.1.04A power input (Supplied) 4.4 First boot ! Make sure that

10 If the HDD fails testing the reasons may include the following： ! Unformatted new hard disk, go to quick configure to format the hard disk drive.

11 Figure 4-4 Shutdown interface 4.6 Displayer resolution adjustment The VHDIPL will support resolutions with VGA 1024*768, VGA 1280*1024, VGA 1600*

12 Figure 4-5 Adjustment Monitor Setup Step 2 Choose the type of resolution in the resolution drop-down box. The VHDIPL will automatically switch t

13 4.7 Adding Network Cameras The VHDIPL allows you to connect a maximum of 4 network cameras. The total recording bit rate is 24 Mbps and live video

14 Figure 4-6 Login screen Step 2 Click Login and enter the main interface.

i About this document Purpose This document is for the VHDIPL, including the product features, hardware installation, network access, network configur

15 5 Quick configuration To quickly configure, use the quick configuration interface of the VHDIPL. It provides: The network configuration, disk manag

16 VHDIPL, this means all cameras will have internal times to match the VHDIPL time. Area 2：Managing camera certification accounts. The certificatio

17 The VHDIPL is capable of detecting and recording up to 16 cameras however for maximum performance we only recommend and support the VHDIPL a 4 cam

18 Figure 4-9 Camera Search Interface Click the button To remove the camera in the camera list, click the check box, select the camera and then cli

19 Figure 4-10 Stream Quick Configurations 5. Click the Apply button to set the current parameters to the devices. ! Set to detect motion detection

20 6 Live video To input the username (default is admin) and password (default is admin), click login. Enter the live video interface, shown in figure

21 Intelligent adaptive mechanism of stream frame rates This system provides the intelligent adaptive mechanism of stream frame rates. When you are se

22 Items Name Content : Automatic Full Screen control 6 Live video Right mouse click on the live display will allow the changing of some display infor

23 Click button to close the PTZ configuration menu. Click button to exit the PTZ control menu. Live video fast operation Right click mouse butt

24 7 Playback 7.1 Recording playback Recording playback will playback the video which is recorded to the local HDD, shown in figure 4-14. Figure 4-14

ii Contents About this document ... i!1 Preface ...

25 After selecting the device and date, at the bottom area of the live video, it will display the recording status. The scale on the time axis shows t

26 Figure 4-16 Backup Path Browser In the backup path, it will display the current backup path, if it is blank, then select one option. In the below

27 7. Double click the network disc path list, select the backup path, click ok button save and exit. ! USB Storage device 1. Insert U disk or remov

28 Figure 4-19 File Search

29 8 Alarm searching Alarm searching Interface Operation steps Step 1 Click to enter the alarm management interface shown in 4-20. Step 2 Select

30 Select the alarm trigger recording files, click button to start playing. Step 7 Alarm recording backup Select the recorded files and click back

31 9 Setup Setup includes the VHDIPL setup and the camera setup. 9.1 VHDIPL setup Click NVR setup in upper right to show the VHDIPL configure interf

32 • Hardware Version • Software Version • Channel Quantity • Disk Quantity ! Only the device name can be edited, other parameters can’t be edit

33 Figure 4-23 Add IP section. 2. Input the Begin IP address and End IP address and Port number. 3. Click Apply to finish the operation. 4. The s

34 Figure 4-25 Add Camera Management Step 4 Select the cameras which you want to add from the left hand side, then click to add them to the VHDIP

iii 10.6 VHDIPL setup ... 51!10.7 Network c

35 9.1.3 System alarming Select Setup > System warning > system warning Enter the system warning shown in Figure 4-26. Figure 4-26 System Warnin

36 Figure 4-27 Network Interface Step 2 Configure the network parameters, reference the Table 4-4. Table 4-4 Network parameters Items Introduction

37 • Create a new layout • View a current layout • Edit a current layout Create New layout The steps to create new layout are shown below: Step 1

38 Step 3 Input the New layout name Step 4 Configure the New layout position, you can select the Shared layout or my layout. Shared layout means th

39 Step 2 Enable the record (Enabled as Default) Step 3 Please select √ on the cameras which you want to record, and also select the correspon

40 Figure 4-32 Schedule record configuration Step 6 To enable the alarm record • If you do not want to enable the alarm record, then just set th

41 9.1.7 Storage policy In storage policy interface, you can do the following operations: • Check the current HDD status. • Check the HDD informatio

42 • System Management • Shutdown • Record service • Set shared layout Step 1 Accounts > Group Enter the Group configuration interface, shown

43 User setting You can add and delete users. The users which have the privilege of system configuration can unlock the system, it may be locked by in

44 Unlock the locked user When logged on to the system, if the user inputs the wrong password more than 3 times, then the system will lock the user, b

45 10 Web Browser Access for VHDIPL VHDIPL Web Server, built-in flash technology supports IE, Chrome, Firefox, Safari and other popular browsers. It

46 Administrator user ID: admin, administrator password: admin. User names and passwords are case-sensitive. Please modify the password after the fir

47 VHDIPL web will only support 16 channels live video and 4 channel playback for one user login (maximum ability), with other users it will only supp

48 Figure 4-42 Set User Video Ability If other users are set to a maximum ability the interface will go back to Figure 4-42 and you can’t set the ab

49 10.4 Playback You can play back the video by the playback interface. Operation Steps Step 1 Click Playback to enter the playback interface shown i

50 Figure 4-44 Playback

51 10.5 Alarm Search Click the Alarm Search in the Alarm Management Interface shown in Figure 4-45. Figure 4-45 Alarm search Step 1 Choose the devi

52 Figure 4-46 VHDIPL setup interface 10.7 Network Camera setup Click the Network Camera Setup on the Web, enter the Camera Configuration interface s

53 11 HD-IP Access for VHDIPL Operation condition Please install HD-IP client from the USB stick provided. The HD-IP client installation methods will

54 11.3 System main interface After entering the correct user name and password, click Login to the system main interface shown in Figure 4-49. Figure

1 1 Preface 1.1 Important note Thank you for choosing the Concept Pro VHDIPL Network Video Recorder (NVR). Please read this user manual carefully befo

55 ! Only the Device Name can be edited, other parameters can’t be edited. Operation Steps Step 1 Select Device Manager > NVR management > D

56 Figure 4-51 Login Interface Step 2 Enter the user name and password, and click Save to exit. 11.4.2 Date and Time Change the date and time of t

57 Figure 4-52 Date and Time Settings Step 2 Change the VHDIPL Date and Time Click the Set button behind the Current Computer Time to sync the time

58 Figure 4-53 Device Management Step 2 Select the cameras and click Add. Call the adding device interface, shown in Figure 4-54 to add all the net

59 Figure 4-54 Add Device 11.4.4 VHDIPL Record VHDIPL can set the Record Policy and Record Storage. Record Policy Step 1 Select Device Manager >

60 Figure 4-55 Record Policy Step 2 Select the device and click Configure. In the Record Policy setting you can set the Schedule Record, Alarm Reco

61 Figure 4-56 Record Storage Step 2 Select the Hard Disk and click Modify enter the path setting interface shown in Figure 4-57. Figure 4-57 Har

62 Step 3 Select Enable. Step 4 Select the Disk Group ID. Step 5 Input the Usable Space. Step 6 Click Modify to save the configuration and exit th

63 11.5.1 Video Search and playback In HD-IP click Playback then click to enter the VHDIPL playback shown in Figure 4-59. Figure 4-59 Playback

64 Blue file on time axis is the video chosen for backup. Press Ctrl to select more parts of the video. Click to backup configure and check the

2 1.2 Check the installation environment Installation environment Before installing the device, check the installation environment according to Table

65 12 HD-IP Lite App 12.1 HD-IP Lite Android device How to download the HD-IP Lite on an Android device From your

66 12.2 HD-IP Lite iOS Device How to download the HD-IP Lite on an iOS device For more information about the HD-IP Lite app, please see th

67 13 F.A.Q 1. Why does the device’s self-test interface not move? Method One: Check the VHDIPL is equipped with a HDD. Method Two: Check the VHDIPL’s

3 2 Specification System CPU SOC (System-on-chip) Operating system Embedded Linux 2.6 Features Embedded CMS system, user friendly interface, easy to

4 In / Out 3.5mm linear audio output Audio formats G711_A，G711_U Network Transmission control Embedded network bandwidth adaptive flow control techn